Lab 5: Respond to ICMP

Overview

This is the third stage in a series of exercises that have the ultimate goal of creating an IPv4 router. The basic functions of an Internet router are to:

1. Respond to ARP (address resolution protocol) requests for addresses that are assigned to interfaces on the router. (Remember that the purpose of ARP is to obtain the Ethernet MAC address associated with an IP address so that an Ethernet frame can be sent to another host over the link layer.)
2. Receive and forward packets that arrive on links and are destined to other hosts. Part of the forwarding process is to perform address lookups ("longest prefix match" lookups) in the forwarding table. We will just use "static" routing in our router rather than implement a dynamic routing protocol like RIP or OSPF.
3. Make ARP requests for IP addresses that have no known Ethernet MAC address. A router will often have to send packets to other hosts, and needs Ethernet MAC addresses to do so.
4. Respond to ICMP messages like echo requests ("pings").
5. Generate ICMP error messages when necessary, such as when an IP packet's TTL (time to live) value has been decremented to zero.

The goal of this stage of the project is to accomplish items 4 and 5 above. When you're done with this project, you will have a fully functioning Internet router.

Your Tasks

After the efforts of Lab 3 and Lab 4, you have implemented part of the functions of the router, including the response to ARP and the forwarding of packets. Next, you need to continue to improve your router in the myrouter.py so that it can respond to ICMP messages.

The main task for this exercise is to modify the Router class to do the following:

[!NOTE] The sentences marked with ✅ are related to the content of your report. Please pay attention.

Task 1: Preparation

Initiate your project with our template.

Start the task here

Task 2: Responding to ICMP echo requests

Respond to ICMP messages like echo requests ("pings").

Start the task here

Task 3: Generating ICMP error messages

Generate ICMP error messages when necessary.

Start the task here

Handing it in

Report

We will provide a template of your lab assignment report here. You need to submit the report in your repository named <学号><姓名>_lab_5. The format of your report can be Microsoft Doc or PDF. An example is 123456789拾佰仟_lab_5.pdf.

Submit to NJU GitLab

To submit your work, you need to do the following things.

1. Modify your code and complete your report.

2. When you have done your work, put your report and code in the folder lab_5 then commit them. Tag the commit named <学号/lab_5> which you want to submit. An example is 123456789/lab_5. Finally your project will look like

   switchyard
     ├─docs/
     ├─.../
   + ├─lab_5/
   + │ ├─123456789拾佰仟_lab_5.pdf
   + │ ├─myrouter.py
   + │ ├─forwarding_table.txt
     │ ├─...
   + │ └─start_mininet.py
     ├─.gitignore
     └─...
   

   [!WARNING] The file names in your submission have to exactly match the file names above. Otherwise, you will lose points!

3. Submit your work by pushing your local repository to your remote repository with your tags by running the command git push origin --tags.

   [!WARNING] Only commit your source code to your local repository. If there are some generated files that are not source code, ignore them by adding them in the file .gitignore.